6200 bearing size chart: 6200 to 6220 deep groove ball bearings
Light single row deep groove ball bearings from 6200 to 6220, the most common series, with boundary dimensions to ISO 15. Pick a bearing to get its dimensions and CAD files.
6200 series bearing dimensions
| Bearing | dmm | Dmm | Bmm | rmin, mm | Clowest of makers, kN | Chighest of makers, kN | C0lowest of makers, kN | C0highest of makers, kN |
|---|---|---|---|---|---|---|---|---|
| 6200 | 10 | 30 | 9 | 0.6 | 5.1 | 5.65 | 2.36 | 2.4 |
| 6201 | 12 | 32 | 10 | 0.6 | 6.75 | 7.5 | 2.75 | 3.1 |
| 6202 | 15 | 35 | 11 | 0.6 | 7.6 | 8.6 | 3.6 | 3.75 |
| 6203 | 17 | 40 | 12 | 0.6 | 9.6 | 10.6 | 4.6 | 4.8 |
| 6204 | 20 | 47 | 14 | 1 | 12.8 | 14.2 | 6.55 | 6.65 |
| 6205 | 25 | 52 | 15 | 1 | 14 | 15.5 | 7.8 | 7.9 |
| 6206 | 30 | 62 | 16 | 1 | 19.5 | 21.6 | 11.2 | 11.3 |
| 6207 | 35 | 72 | 17 | 1.1 | 25.7 | 28.4 | 15.3 | 15.3 |
| 6208 | 40 | 80 | 18 | 1.1 | 29.5 | 32.5 | 17.8 | 19 |
| 6209 | 45 | 85 | 19 | 1.1 | 31.2 | 36 | 20.3 | 21.6 |
| 6210 | 50 | 90 | 20 | 1.1 | 35 | 39 | 23.2 | 23.2 |
| 6211 | 55 | 100 | 21 | 1.5 | 43.4 | 48 | 29 | 29.3 |
| 6212 | 60 | 110 | 22 | 1.5 | 47.8 | 58 | 32.9 | 36 |
| 6213 | 65 | 120 | 23 | 1.5 | 57.2 | 63.5 | 40 | 40.5 |
| 6214 | 70 | 125 | 24 | 1.5 | 60.8 | 69 | 44 | 45 |
| 6215 | 75 | 130 | 25 | 1.5 | 66.1 | 73.5 | 49 | 49.5 |
| 6216 | 80 | 140 | 26 | 2 | 72.7 | 80.5 | 53 | 55 |
| 6217 | 85 | 150 | 28 | 2 | 83.2 | 92.5 | 62 | 64 |
| 6218 | 90 | 160 | 30 | 2 | 96 | 106 | 71.5 | 73.5 |
| 6219 | 95 | 170 | 32 | 2.1 | 109 | 121 | 81.5 | 82 |
| 6220 | 100 | 180 | 34 | 2.1 | 122 | 135 | 92.7 | 93 |
Dimensions in millimetres unless stated. Select a row to load its CAD files above.
Bearing dimensions to ISO 15 and load ratings
Bore d, outside diameter D, width B and the minimum chamfer r are boundary dimensions set by ISO 15, so they are the same whichever maker you buy from. Load ratings are not: each maker publishes its own. The table gives the lowest and highest basic dynamic (C) and static (C0) ratings among the catalogues we checked; use your supplier's figure for the calculation.
The CAD file is a simplified shielded bearing: both rings with their chamfers and the space between them closed by flat shields. It is meant for assemblies and drawings, not for showing the balls and cage.
6204 and 6205 bearing size
The two most searched bearings of the series sit next to each other in the table. A 6204 is 20 × 47 × 14 mm and a 6205 is 25 × 52 × 15 mm, both with a 1 mm minimum chamfer. For the same bore, the 6004 and 6005 are thinner and the 6304 and 6305 larger and stronger.
6200 bearings: common questions
- What size is a 6205 bearing?
- 25 mm bore, 52 mm outside diameter and 15 mm wide. The bore code 05 times five gives the 25 mm bore.
- What size is a 6204 bearing?
- 20 mm bore, 47 mm outside diameter and 14 mm wide, with a minimum chamfer of 1 mm.
- What do 2RS and ZZ mean after 6204?
- They are suffixes for the closure: rubber seals or metal shields on both sides. They do not change the boundary dimensions, so a 6204-2RS and a 6204-ZZ are the same size as a plain 6204.