6000 bearing size chart: 6000 to 6020 deep groove ball bearings
Extra light single row deep groove ball bearings from 6000 to 6020, with boundary dimensions to ISO 15. Pick a bearing to get its dimensions and CAD files.
6000 series bearing dimensions
| Bearing | dmm | Dmm | Bmm | rmin, mm | Clowest of makers, kN | Chighest of makers, kN | C0lowest of makers, kN | C0highest of makers, kN |
|---|---|---|---|---|---|---|---|---|
| 6000 | 10 | 26 | 8 | 0.3 | 4.6 | 5.05 | 1.96 | 2 |
| 6001 | 12 | 28 | 8 | 0.3 | 5.1 | 5.65 | 2.36 | 2.4 |
| 6002 | 15 | 32 | 9 | 0.3 | 5.6 | 6.2 | 2.8 | 2.85 |
| 6003 | 17 | 35 | 10 | 0.3 | 6 | 7.55 | 3.25 | 3.35 |
| 6004 | 20 | 42 | 12 | 0.6 | 9.4 | 10.4 | 5 | 5.05 |
| 6005 | 25 | 47 | 12 | 0.6 | 10.1 | 11.9 | 5.8 | 6.55 |
| 6006 | 30 | 55 | 13 | 1 | 13.2 | 14.7 | 8.3 | 8.3 |
| 6007 | 35 | 62 | 14 | 1 | 15.9 | 17.7 | 10.2 | 10.3 |
| 6008 | 40 | 68 | 15 | 1 | 16.8 | 18.6 | 11 | 11.5 |
| 6009 | 45 | 75 | 16 | 1 | 19.9 | 23.2 | 14 | 15.2 |
| 6010 | 50 | 80 | 16 | 1 | 21.8 | 24.2 | 16 | 16.6 |
| 6011 | 55 | 90 | 18 | 1.1 | 28.3 | 31.5 | 21.2 | 22.4 |
| 6012 | 60 | 95 | 18 | 1.1 | 29.5 | 32.5 | 22.7 | 23.2 |
| 6013 | 65 | 100 | 18 | 1.1 | 30.5 | 34 | 23.5 | 25.2 |
| 6014 | 70 | 110 | 20 | 1.1 | 38.6 | 42 | 30.4 | 31 |
| 6015 | 75 | 115 | 20 | 1.1 | 40.1 | 44 | 33.1 | 33.5 |
| 6016 | 80 | 125 | 22 | 1.1 | 47.5 | 53 | 39.8 | 40 |
| 6017 | 85 | 130 | 22 | 1.1 | 52 | 55 | 43 | 44.5 |
| 6018 | 90 | 140 | 24 | 1.5 | 58 | 64.5 | 49.5 | 50.6 |
| 6019 | 95 | 145 | 24 | 1.5 | 60.5 | 67 | 51 | 54 |
| 6020 | 100 | 150 | 24 | 1.5 | 60.2 | 66.5 | 54 | 54.2 |
Dimensions in millimetres unless stated. Select a row to load its CAD files above.
Bearing dimensions to ISO 15 and load ratings
Bore d, outside diameter D, width B and the minimum chamfer r are boundary dimensions set by ISO 15, so they are the same whichever maker you buy from. Load ratings are not: each maker publishes its own. The table gives the lowest and highest basic dynamic (C) and static (C0) ratings among the catalogues we checked; use your supplier's figure for the calculation.
The CAD file is a simplified shielded bearing: both rings with their chamfers and the space between them closed by flat shields. It is meant for assemblies and drawings, not for showing the balls and cage.
6000 bearing size against the 6200 and 6300
The 6000 series is the thinnest section for each bore: a 6001 is 12 × 28 × 8 mm, where the 6201 with the same bore is 32 × 10 mm. It fits where radial space is tight and loads are light. The ball bearing size chart lines up the three series by bore.
6000 bearings: common questions
- What are the dimensions of a 6001 bearing?
- 12 mm bore, 28 mm outside diameter and 8 mm wide, with a minimum chamfer of 0.3 mm.
- What does the 0 in 6000 mean?
- It is the series: 0 is the extra light series. The 6 in front means a single row deep groove ball bearing, and the last two digits are the bore code.